Fixed Crossover Ladder

Print this page
Fixed Crossover Ladder
  • ID: #4937
  • Availability: 10 In Stock

Fixed Crossover Ladder

The Fixed Crossover Ladder will get the most use from a minimum amount of floor space, crossovers provide safe, convenient access over conveyors, assembly lines, piping or other obstructions.

The comfortable 48° stair slope allows worker to descend facing outward. Any combination of 6 stair heights and 5 bridge lengths is available in 3 standard widths to satisfy most requirements.

Custom sizes and configurations are also available.

Fixed Crossover Ladder Features:

  • Supplied in three pieces: two stair sections and one bridge
  • Structural frame and rails are heavy 1¼” schedule 40 pipe
  • Standard step and bridge tread: expanded metal or serrated grating
    [Optional solid steel tread with abrasive mat on bridge is available to avoid debris falling onto conveyors]
  • Full rails, midrails and toeboards
  • Stair sections have 10″ step spacing with 9″ of horizontal run per step
  • Each stair section has four legs with large, pre-drilled plates to bolt to floor
  • Standard finish is gray enamel
  • Rated capacity 600 lbs. Maximum use of limited floor space while complying to OSHA requirements

 

Fixed Crossover Ladder Specifications:

No. of Steps
[each section]
Vertical
Clearance
[inches]
27″ Overall Width
Expanded Metal
Model*                 Wt. [lbs.]
31½” Overall Width
Serrated Grating
Model*             Wt. [lbs.]
38½” Overall Width
Serrated Grating
Model*             Wt. [lbs.]
2
28
CS227          253
CS231         254
CS238         276
3
38
CS327          310
CS331         325
CS338         351
4
48
CS427          378
CS431         393
CS438         428
5
58
CS527          445
CS531         465
CS538         505
6
68
CS627          517
CS631         537
CS638         583
7
78
CS727          600
CS731         630
CS738        680
Bridge Sections for Industrial Crossovers
Combine any length with appropriate width stair sections

Length
[inches]
Horizontal
Clearance
[inches]
27″ Overall Width
Expanded Metal
Model*   Wt. [lbs.]
31½” Overall Width
Serrated Grating
Model* Wt. [lbs.]
38½” Overall Width
Serrated Grating
Model* Wt. [lbs.]
20
18
-CB227     88
-CB231      95
-CS238     102
30
28
-CB327    111
-CB331      120
-CS338     128
40
38
-CB427    133
-CB431      140
-CS438     153
50
48
-CB527    156
-CB531      165
-CS538     180
60
58
-CB627    195
-CB631      203
-CS638     220

*Complete model designation includes prefix, indicating a pair of stair sections from “Stair Sections” table. Specify your choice of treads.

 

 

Buy Manlifts can and will customize an aerial access solution to meet your custom specifications. Operators always standing by, (888) 730-8377.


Request Quote for Fixed Crossover Ladder