HTL9055 TIER III Telehandler

Print this page
HTL9055 TIER III Telehandler
  • ID: #4921
  • Availability: 10 In Stock
  • $108097.00

HTL9055 TIER III Telehandler

 

HTL9055 TIER III Telehandler Features:

  • Adaptability and performance
  • Optimized load rating
  • Hydraulic control for standard accessories
  • Tilt corrector as standard
  • Power and precision
  • Standard hydrostatic transmission
  • Simultaneous and proportional controls of all 4 movements of the boom with flow sharing
  • Safety and reliability
  • Standard rear axle locking
  • Dangerous movements cut out switch
  • LMI easy to read including automatic cut off of dangerous movements
  • High safety cab
  • Smart control 4-in-1 joystick

 

HTL9055 TIER III Telehandler Specifications:

 

Alternator 95 A
Approach angle 29 °
Lower rotation of forks 104 °
Upper rotation of forks 18 °
Aspiration 0
Transmission 0.1315 gal
Lift capacity to full height 5512 lbs
Lift capacity to full height – stabilizers down 5512 lbs
Lift capacity to full height – stabilizers up 1764 lbs
Lift capacity at full reach 1543 lbs
Lift capacity at full reach – stabilizers down 1543 lbs
Maximum lift capacity – stabilizers up 8820 lbs
Maximum lift capacity 8820 lbs
Maximum lift capacity – stabilizers down 8820 lbs
Oil reservoir 30.245 gal
Tilt corrector 10 °
Engine capacity 246.318 in3
Starter 3 KW
Maximum distance between forks 41.6 in
Wheelbase 9 ft 6 in
Rear axle 2.7878 gal
Front axle 3.3138 gal
Ground clearance 19.7 in
Overall height – stabilizers down 8.8506 ft
Height to high boom pivot 5.7365 ft
Height 8 ft 6 in
Maximum fork height 54 ft 1 in
Maximum fork height – stabilizers down 54 ft 1 in
Maximum fork height – stabilizers up 49.17 ft
Engine oil 29 gal
Overall width – stabilizers down 11 ft 0 in
Cab width 3 ft 2 in
Width 8 ft 0 in
Length 21 ft 1 in
Engine model PERKINS TIER III
Maximum gradient 45 %
Weight with forks 26460 lbs
Reach at maximum fork height 7 ft 1 in
Reach at maximum fork height – stabilizers down 7 ft 1 in
Reach at maximum fork height – stabilizers up 7.8672 ft
Maximum forward reach 42 ft 2 in
Maximum forward reach – stabilizers down 42 ft 2 in
Maximum forward reach – stabilizers up 37.3692 ft
Engine power output 70kW @ 2300rpm
Turning radius at the tip of the forks 20.4875 ft
Outside turning radius 14 ft 9 in
Inside turning radius 8.195 ft
Coolant 4.734 gal
Fuel tank 34.8475 gal
Operating voltage 12 V
Tires type 15.5/80-24
Speed in traveling mode 18.6 mph
Speed in working mode 5 mph
Track width 6 ft 4 in
Engine torque 392Nm @ 1400rpm

 

 

Buy Manlifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377


Request Quote for HTL9055 TIER III Telehandler